Plaströrsystem - Rör och rördelar för distribution av vätska - Undersökning av elektromuffsvetsar av polyeten med phased array-ultraljudsprovning (ISO/TS 16943:2019)
Plaströrsystem - Rör och rördelar för distribution av vätska - Undersökning av elektromuffsvetsar av polyeten med phased array-ultraljudsprovning (ISO/TS 16943:2019)
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang
This document describes the phased array ultrasonic testing (PAUT) of polyethylene electrofusion (EF) socket joints used for the conveyance of fluids. This document provides a test whereby the presence of imperfections such as voids, wire dislocation, misalignment, pipe under-penetration, particulate contamination, cold fusion and lack of fusion in electrofusion socket joints can be detected. The technique is only applicable to polyethylene electrofusion socket fittings without a barrier to ultrasonic
waves. This document also provides requirements for procedure qualification and guidance for personnel qualifications, which are essential for the application of this test method
NOTE 1 At the time of publication, experience only exists on the use of PAUT for polyethylene (PE80 and PE100) electrofusion socket joint sizes between 90 mm and 710 mm (SDR 11 and 17)[7][8][9][10][11][12][13].
NOTE 2 Round robin testing has shown that PAUT is a viable method for enhancing the integrity assessment of electrofusion joints[16].
NOTE 3 This document does not apply to the detection of unscraped pipe. Such detection can be achieved by a simple visual inspection, provided mechanical scraping tools are employed.
Plaströrsystem - Rör och rördelar för distribution av vätska - Undersökning av elektromuffsvetsar av polyeten med phased array-ultraljudsprovning (ISO/TS 16943:2019)
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang
Internationell titel: Thermoplastic pipes for the conveyance of fluids - Inspection of polyethylene electrofusion socket joints using the phased array ultrasonic testing method (ISO/TS 16943:2019)
Artikelnummer: STD-80018934
Utgåva: 1
Fastställd: 2019-12-13
Antal sidor: 32
Inom samma område
Varorna och tjänsterna som listas nedan ligger i samma ämnesområde (ICS-kod).